Basic Info.
Temperature Adjustable Area
Single Area
Certification
RoHS, CE, FCC
Transport Package
Honeycomb Carton
Specification
48X20X48 cm
Product Description
12V 5kw All-in-One Diesel Fuel Parking Air HeaterPurchase Notes:
1 After the first installation, it should be turned on several times to completely eliminate the air in the fuel supply system and make the fuel pipe full of fuel.
2 Perform a test run before use, and carefully check the leak and safety status of all connections during the test run. If there is smoke emission, abnormal burning noise or fuel smell, turn off the heater, unplug the fuse, make it unable to operate, and use it after professional maintenance.
3 Prior to each heating season, a qualified professional must perform an inspection to perform the following maintenance tasks:(1) Check the air inlet and outlet for contaminants and foreign objects(2)Cleaning the outside of the heater(3)Check the circuit connector for rust and looseness(4)Check the intake and exhaust pipes for blockage and damage(5)Check the fuel line for leaks
4 When the heater is not used for a long time, it should be run every four weeks, about 10 minutes each time. The oil pump and the combustion air fan prevent the mechanical parts from malfunctioning (solid death).
5 The air inlet and outlet of the heater must be kept free of blockage and dirt, and the warm air duct is unobstructed to prevent overheating.
6 When replacing low-temperature fuel, the heater should be operated for at least 15 minutes to inject new oil into the fuel line and fuel pump.
7 The heat exchanger of the heater should not be used for more than 10 years. After the expiration, it must be replaced by genuine parts and replaced by the heater manufacturer or its authorized agent. At this time, the overheating sensor must also be replaced at the same time.
8 The exhaust pipe that emits the exhaust gas from the heater, if it is arranged in the area of a person, must be updated with genuine parts when the use time reaches 10 years.
9 When performing electric welding on a car, first remove the positive power cord of the heater from the battery and ground it to avoid damage to the controller.
10 During the transportation and storage process, the ambient temperature of the heater should not exceed 40c~85c to prevent damage to electronic components.
11 Only authorized customer service stations are allowed to install and repair heaters, and non-original parts are prohibited from being used to avoid danger.
12 The heater is damaged by self-removal or failure to install and operate according to the regulations,The manufacturer is not responsible for the warranty.
| Product name | Parking Heater | Heating Voltage | 12v/24V |
| PC | Unit | Certification | CE, RoHS |
| Power | 5kw/8kw | Warranty | 1 Years |
| Size | 48cm*48cm*20cm | Port | Ningbo/Shanghai |
| Applicable vehicle | Trucks, Construction Vehicles, Buses, Motor Homes, Agricultural Vehicles, Diesel Vehicles, Etc. |
When placing the exhaust port, it is necessary to prevent the exhaust gas from entering the interior of the vehicle through the overcooler, hot air inlet or window.
Combustion of airDo not draw in the passenger compartment the combustion air used for the combustion of the heater.
Place the air intake should be noted that it can not be blocked by objects.
Heated air inletThe supplied heated air must consist of fresh air or circulating air and is taken from a clean area.
Protective gates or other suitable tools must be used to protect the intake ducts.
Heated air outletWhen placing hot air pipes in a car, make sure that it is not easy to be touched to prevent injury or damage to the subject.
Exhaust systemWhen arranging the exhaust pipe, it must be noted that the exhaust pipe outlet must avoid flammable materials, avoid heating or igniting ground combustibles or loading cargo.
Working e nvironment
1.Applicable ambient temperature:-40ºC~40ºC
2.Applicable altitude:≤3000 meter
3.Fuel: Must use light diesel oil suitable for the current environment (Note: This machine may not use gasoline fuel)
Safety instructions for installation and operation
The following measures are not allowed
- Change the key components on the heater.
- Use other manufacturer parts without the permission of the Company.
In the installation or operation of the specifications described in violation of the specification.
Only original accessories and original accessories are allowed for installation or maintenance.
Do not allow the use of heaters in the formation of flammable vapors or dust, as in the following facilities:
- fuel warehouse
- carbon storage warehouse
- wood warehouse
- granary and similar locations
The heater must be closed when refueling
If the fuel flows out of the fuel system of the heating equipment (leaked), it should be returned immediately to the service provider for repair.
During the operation of the heater, it is not allowed to stop the heater operation by power failure.
Warning:
1. Installation, the fixed plate must be kept closed with the car sheet metal, so as not to burn the exhaust through the gap into the cab damage to the driver's body.
2. The length of the exhaust pipe shall not be less than 30 cm.
3. The exhaust outlet must be fixed in the open space.
4. Exhaust pipe outlet is not allowed to travel direction.
Recommendation: After the heater is fixed, it is recommended to use the sealant to seal the installation gap.
Our CompanyNINGBO WIN FULL AUTO PARTS CO., LTD. We are a professional manufacturer of automotive parts. A professional manufacturer integrating design, development and manufacturer. We specialize in a range of fashion accessories. Diversified, reasonable prices and on time delivery.
FAQQ1
. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
NEXT RFQQ1.Do you make customer's auto AC parts?
A. Yes,you can send us samples and we can develop the new models especially for you.
Q2.What is your Minimum Order Quality?
A. Different products have different MOQ,but we can sell you even one piece if we have stock the model of you need.
Q3.What about delivery time?
A. If we have stock of the item you need, we can send goods to you within 2 working days after deposit or 100% payment into our bank account. If we don't have stock,the time to make each product is different generally, it takes 1 to 30working days.
Q4.What's your agency distributor policy focused on auto AC parts?
A. We have some different policies according to target markets, So please send emails for detailed discussions or talk face to face.
