Basic Info.
Temperature Adjustable Area
Single Area
Certification
RoHS, CE, FCC
Heating Power
2kw/5kw/8kw
Transport Package
Export Carton
Specification
46X47X30 cm
Product Description
Diesel Air Lcd Switch Controller Parking HeaterThe heater can be applied for heating the cab of the freight vehicles, vans-, storage battery cars and all kinds of other vehicles.
Can preheat the coolant of the engine to avoid wear and tear of engine that started at low temperature;
Can eliminate the window frost;
Environmentally product, low emissions, low fuel consumption; heater exhaust emissions to meet euro IV engine emissions requirements.
Compact structure, easy to install;
Can dismantle to a new car when replace vehicle.
Volatile technology, by the ceramic ignition plug will fuel heating evaporated into gas, fast ignition, full combustion.
The use of advanced automatic control technology, with a reliable abnormal operating conditions.
Fuel, electricity, temperature can be set arbitrarily .
Can use diesel- as fuel.
| Product name | Parking Heater | Heating Voltage | 12v/24V |
| Packing size | 46*47*30(cm) | Appication | Parking air heater |
| PCUnit | pc | Certification | CE, RoHS,FCC |
| Power | 1kw-8kw | Warranty | 1 Year |
| Applicable vehicle | Trucks, Construction Vehicles, Buses, Motor Homes, Agricultural Vehicles, Diesel Vehicles, Etc. |
- Get rid of damage to car causing by the sudden drop of temperature.
- Low noise: noise reduction processing with minimal noise.
- Easy installation: the compact design is good for using in a variety of narrow spaces.
- Low fuel and power consumption for longer periods of operation.
- Smooth, automatic room temperature control with temperature pre-set facility.
- With continuous monitoring and diagnostic system.
- Fuel supplied from the vehicle's own tank.
- Applicable to: various diesel mechanical vehicles such as cars, buses, RVs, trucks, engineering vehicles, etc.
Product DetailsIt is necessary to prevent the object around the heater from being affected or damaged by high temperature.Exhaust systemWhen placing the exhaust port, it is necessary to prevent the exhaust gas from entering the interior of the vehicle through the overcooler, hot air inlet or window.
Combustion of airDo not draw in the passenger compartment the combustion air used for the combustion of the heater.
Place the air intake should be noted that it can not be blocked by objects.
Heated air inletThe supplied heated air must consist of fresh air or circulating air and is taken from a clean area.
Protective gates or other suitable tools must be used to protect the intake ducts.
Heated air outletWhen placing hot air pipes in a car, make sure that it is not easy to be touched to prevent injury or damage to the subject.
Exhaust systemWhen arranging the exhaust pipe, it must be noted that the exhaust pipe outlet must avoid flammable materials, avoid heating or igniting ground combustibles or loading cargo.
Working e nvironment1.Applicable ambient temperature:-40ºC~40ºC
2.Applicable altitude:≤3000 meter
3.Fuel: Must use light diesel oil suitable for the current environment (Note: This machine may not use gasoline fuel)
Safety instructions for installation and operationThe following measures are not allowed
- Change the key components on the heater.
- Use other manufacturer parts without the permission of the Company.
In the installation or operation of the specifications described in violation of the specification.
Only original accessories and original accessories are allowed for installation or maintenance.
Do not allow the use of heaters in the formation of flammable vapors or dust, as in the following facilities:
- fuel warehouse
- carbon storage warehouse
- wood warehouse
- granary and similar locations
The heater must be closed when refueling
If the fuel flows out of the fuel system of the heating equipment (leaked), it should be returned immediately to the service provider for repair.
During the operation of the heater, it is not allowed to stop the heater operation by power failure.
Warning:1. Installation, the fixed plate must be kept closed with the car sheet metal, so as not to burn the exhaust through the gap into the cab damage to the driver's body.
2. The length of the exhaust pipe shall not be less than 30 cm.
3. The exhaust outlet must be fixed in the open space.
4. Exhaust pipe outlet is not allowed to travel direction.
Recommendation: After the heater is fixed, it is recommended to use the sealant to seal the installation gap.
Packing&Delivery Corrugated Carton , Packing for ordinary delivery.
Color Box
We will provide OEM service for mass order.1~50 pcs :$4/pc
51~150 pcs: $2/pc
151~500 pcs: $1/pc
501~1000 pcs: $0.5/pc
>1000 pcs: for free
Our Company
NINGBO WIN FULL AUTO PARTS CO., LTD. We are a professional manufacturer of automotive parts. A professional manufacturer integrating design, development and manufacturer. We specialize in a range of fashion accessories. Diversified, reasonable prices and on time delivery.
FAQQ1
. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
NEXT RFQQ1.Do you make customer's auto AC parts?
A. Yes,you can send us samples and we can develop the new models especially for you.
Q2.What is your Minimum Order Quality?
A. Different products have different MOQ,but we can sell you even one piece if we have stock the model of you need.
Q3.What about delivery time?
A. If we have stock of the item you need, we can send goods to you within 2 working days after deposit or 100% payment into our bank account. If we don't have stock,the time to make each product is different generally, it takes 1 to 30working days.
Q4.What's your agency distributor policy focused on auto AC parts?
A. We have some different policies according to target markets, So please send emails for detailed discussions or talk face to face.
