Professional Factory of Parking Fuel Air Heater

 


Product details

Package Content:

1 x Parking Heater (LCD Thermostat)
1 x Remote Control (Batteries NOT included)
1 x Air Outlet Pipe
1 x Intake Pipe
1 x Exhaust Pipe 
1 x Silencer
1 x Air Filter
1 x Fixture Accessories Set

Installation details
1.After the first installation, it should be turned on several times to completely eliminate the air in the fuel supply
system and make the fuel pipe full of fuel.
2.Perform a test run before use, and carefully check the leak and safety status of all connections during the test run.
If there is smoke emission, abnormal burning noise or fuel smell, turn off the heater, unplug the fuse, make it unable
to operate, and use it after professional maintenance.
3.Prior to each heating season, a qualified professional must perform an inspection to perform the following
maintenance tasks:
        (1) Check the air inlet and outlet for contaminants and foreign objects
        (2)Cleaning the outside of the heater
        (3)Check the circuit connector for rust and looseness
        (4)Check the intake and exhaust pipes for blockage and damage
        (5)Check the fuel line for leaks
4.When the heater is not used for a long time, it should be run every four weeks, about 10 minutes each time. The oil
pump and the combustion air fan prevent the mechanical parts from malfunctioning (solid death).
5.The air inlet and outlet of the heater must be kept free of blockage and dirt, and the warm air duct is unobstructed
to prevent overheating.
6.When replacing low-temperature fuel, the heater should be operated for at least 15 minutes to inject new oil into the
fuel line and fuel pump.
7.The heat exchanger of the heater should not be used for more than 10 years. After the expiration, it must be replaced
by genuine parts and replaced by the heater manufacturer or its authorized agent. At this time, the overheating
sensor must also be replaced at the same time.
8.The exhaust pipe that emits the exhaust gas from the heater, if it is arranged in the area of a person, must be
updated with genuine parts when the use time reaches 10 years.
9.When performing electric welding on a car, first remove the positive power cord of the heater from the battery and
ground it to avoid damage to the controller.
10.During the transportation and storage process, the ambient temperature of the heater should not exceed 40c~85c
to prevent damage to electronic components.
11.Only authorized customer service stations are allowed to install and repair heaters, and non-original parts are
prohibited from being used to avoid danger.
12.The heater is damaged by self-removal or failure to install and operate according to the regulations,The
manufacturer is not responsible for the warranty.


Our company

NINGBO WIN FULL AUTO PARTS CO., LTD. We are a professional manufacturer of automotive parts. A professional manufacturer integrating design, development and manufacturer. We specialize in a range of  fashion accessories. Diversified, reasonable prices and on time delivery.


FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.


NEXT RFQ

Q1.Do you make customer's auto AC parts?
A. Yes,you can send us samples and we can develop the new models especially for you.

Q2.What is your Minimum Order Quality?
A. Different products have different MOQ,but we can sell you even one piece if we have stock the model of you need.

Q3.What about delivery time?
A. If we have stock of the item you need, we can send goods to you within 2 working days after deposit or 100% payment into our bank account. If we don't have stock,the time to make each product is different generally, it takes 1 to 30working days.

Q4.What's your agency distributor policy focused on auto AC parts?
A. We have some different policies according to target markets, So please send emails for detailed discussions or talk face to face.